ACCESSORIES

HOME

|

NEWS

|

|

Log In

|

|

|

SUPPORT & ASSISTENCE

|

>

STONE WORKING MACHINES

>

ACCESSORIES

ACCESSORIES


	ACCESSORIES

Gliding plate plus with wheels for Master 2800
	It is an optional which can be mounted on the Master 2800 machine in order to work both on a polished and on a rough slab. It can be dismounted in any moment.

Gliding plate plus with wheels for Master 3500
	It is an optional which can be mounted on the Master 3500 machine in order to work both on a polished and on a rough slab. It can be dismounted in any moment.

"Water System" plate for Master 3500
	It is an optional which can simply be mounted on Master 3500 machine with wheels, substituting the gliding plate with wheels.

Triple vacuum device with template
	It is equipped with 4 suction cups and a PVC template. It is the perfect solution to rectify the internal hole of bathroom tops.

Adjustable triple vacuum suction cups H86
	TECHNICAL CHARACTERISTICS: Built in anticorodal - PVC - nylon. Triple vacuum effect. Screws in stainless steel.

Suction cup H50 in PVC
	Double suction cup to equip the vacuum control panel. It blocks the slab to be worked on the working bench. It is better to block firmly every slab before working in order to avoid waves on the profile.

Kit of n. 6 Double Suction Cups for Working Bench
	Kit composed of six double suction cups which equip the vacuum control panel. They block the slab to be worked on the working bench.

Pneumatic vacuum control panel
	It creates a "vacuum" effect thanks to the suction cups which block the slab on the working bench.

Lifting support for Master 3500 and 2800
	Positioning the Master 2800 or 3500 machine on the lifting support it is possible to rectify, shape and polish the hole internal edge of a top hole. The machine glides in the internal part of the hole simplifying the work.

Rectification wheels 80x33 for granite and marble
	It is necessary for rectification of internal edge of top holes. It prepares the profile to grindind and polishing steps.

Inclined bench
	Inclined bench for the realization of decorative fillets, greek fret, frames etc.

Telescopic arm
	The suction cup with telescopic arm for Laser 4000 permits the realization of round cuts from a minimum radius of 12 cm to a maximum of 3,5m.

Working Bench
	Useful for all kinds of works, such as bathroom tops, kitchen tops, stairs, artistic and monumental works.

MEM 1500
	Safety electrical conversion unit MEM1500 – 380-220V, constructed according to the international safety regulations. It can be connected to MASTER 2800.

MEM 3000
	Safety electrical conversion unit MEM3000 – 220v or 380v constructed according to the international safety regulations. It can be connected to MASTER 3500 and LASER 4000 machines.

ITALY Tel. +39 0761 5051 MARMOELETTROMECCANICA® All Right Reserved P.IVA 04795551003

|

|